How To Install Hardie Board Panels. Hardie board sidings are 12 feet in length. Learn how to install hardiepanel vertical siding products.
This video will outline the basics of installing james hardie's fiber cement products. Hardie board sidings are 12 feet in length. Avoid installation problems by hiring a qualified siding contractor in omaha
Table of Contents
• James Hardie Building Products Provides Installation /Wind Load Information For Buildings With A Maximum Mean Roof Height Of 85 Feet.
First, cover the walls with foam or plywood. Using 6d or 8d stainless or galvanized siding nails is best recommended for this. This is the option james hardie recommends the most.
Use This Measurement To Cut The 2 Nd.
Install hardie board siding—detailed attention will be given to the joints between siding boards. Place the saw's blade next to the mark on the hardie board. For information on installations above 60 feet, please contact jh technical support.
It Is However Possible To Install The Boards Horizontally.
After attaching the taps on the back, you can start attaching the hardie trim to the side of your building. Then use a flashing behind the board and measure the rest of the distance. Set fastener heads flush with the surface without overdriving.
Install The Panels In Moderate Contact.
There are four methods for the vertical joint treatment in james hardie stucco panel siding. Attach flat tabs at the back of the hardie trim before installing. Drive the nails to be just flush with the surface of the panel, but not so deep that the nails dimple the panel surface.
James Hardie Is Not Responsible For Damage Caused.
Apply colorplus touchup for a finished look—extra care will be taken not to use too much paint when touching up after installation. As a homeowner, you will work with a contractor, who will facilitate the installation of your hardie® siding, trim, soffit, wrap and flashing products (including products with colorplus® technology). To prepare for your siding installation project, you’ll need to do these three things.